Crank Brothers Eggbeater 11 Pedals Gold

When it comes to mud, there isn't a better pedal on the market. Eggbeaters are made for slop. Their open design allows dirt, mud, and muck to pass right through as you engage your cleats. These Eggbeater 11 Pedals are the most recent iteration of the top-of-the-line Eggbeater 4Ti pedals. Similarly, they have titanium bodies, wings, and spindles. The spring is stainless steel for durability and consistent tension. And maybe the nicest thing is that no matter where you ride, stainless and titanium will never corrode.

The brass cleats for the Crankbrothers Eggbeater 11 Pedals are small so they recess flush with the tread on the bottom of your shoes for easy walking. They're also designed for two release angles -- 15° or 20°. The release angle depends on which cleat you bolt to which shoe. Crankbrothers recommends the 15° setting if you're new to clipless. Otherwise, the 20° configuration will give you greater mobility on the bike without the worry of an accidental release. Needle and cartridge bearings will keep the Eggbeater 11 Pedals spinning smoothly -- a great improvement from the old bushings. And when the time comes for an overhaul, keep in mind that nobody else's pedals are as easy to service as Crankbrothers' pedals are. Shims to protect your shoes are included as well as all the hardware you'll need for installation

* Please Note: Titanium spindles are not for everyone. Crankbrothers recommends a 200lb (90kg) rider weight limit for the Eggbeater 11 Pedals*

weight
174g per pair

spindle
6al / 4v titanium

body
6al / 4v titanium

wings
6al / 4v titanium

spring
300 series stainless steel

inner bearing
needle

outer bearing
cartridge

cleat
premium brass race cleat

shims
included

release angle
15' to 20'

max rider weight
200lb / 90kg recommended

warranty
5 years